How To Protect Solar Panels From Hails?

The power of the sun is one of the most amazing things about it. We use it to light up our homes, charge our phones, and make our cars go. But there’s another way that we can harness its power by using solar panels.

Solar panels are great because they generate electricity without emitting any harmful emissions into the atmosphere. They’re also relatively inexpensive, which makes them a good option for those who want to go green.



The problem is solar panels are susceptible to hail damage. In fact, they are one of the most common forms of weather damage. It is a frequently asked question that how To Protect Solar Panels From Hails?

Hail is usually composed of small particles that are really hard to see and therefore the risk of hitting them is very high. And if you look around, you’ll notice that most homes and commercial buildings are not built to withstand strong winds or storms.

If there is a hailstorm, and you know that if you leave your panels exposed, your panels will be damaged by hail.  Even if the damage is only cosmetic, you will still be lost on the cost of replacing them.

You do not want to have to worry about maintaining it or buying special materials to make it work properly. You do not want to have to spend a fortune on a special cover because you are not sure if it will work well enough.



There are many different ways to protect your solar panels from hail. We would like to reveal some simple techniques you can use to protect your solar panels from hail damage.

All you have to do is follow the guidelines below and this will ensure that your panels will last for years to come. These methods are safe and they won’t harm your panels in any way. They will help you avoid the need to purchase expensive repair services or replacement panels.

How to keep solar panels clean and protect them from hail?


Solar panels need to be cleaned frequently. You can clean your panels easily with a cloth or a biodegradable soap that’s made from natural oils. You should clean your panels by using a soft cloth or biodegradable soap. Solar panels are important for the environment, and it is important not to use harsh materials when cleaning them as they could cause damage. If you regularly clean your panels, you might be able to just use water to remove any dirt or follow the steps below:

  • Fill a bucket with warm water and add a small amount of mild soap.
  • Rake leaves, remove spider webs, and do other light cleaning and maintenance to prepare the solar panels for winter.
  • Use soapy water to gently wash the panels of any debris or buildup.
  • Rinse solar panels thoroughly to remove all the dirt and dust that’s accumulated over time.

But if you go out on a stormy day, hailstorms can easily damage your panels. You can’t just open the panels and let the hailstones crash through. It could potentially destroy the cells. Well, you can use a metal cover that is specifically designed to prevent hail from breaking the panels.

Buy Metal Cover To Prevent Hail From Breaking The Solar Panels

The metal cover protects the panels from hail. If you have one or more panels already, these covers will protect your panels from hailstone cracks, and dents as they fall.

However, they won’t protect your panels from the wind and rain. So, to protect your panels from wind and rain you will need a cover that goes over the entire panel. They are fairly easy to install and use, so there’s nothing special you need to do to get the covers to work. You can buy the covers online or go to a garden store and ask them to help you put the cover over your panels.

A Layer Of Methacrylate To Protect Your Solar Panels From Hail

Methacrylate is a polymer, which is a chemical compound made up of carbon, hydrogen, and oxygen atoms. It is often referred to as acrylic or methacrylic. It is one of the most common plastics used in the manufacturing of a variety of products, including kitchenware, bathroom fixtures, furniture, and automotive parts.

Methacrylate is a great product for adding strength to your panels. It also provides a protective cover for your panel. It can be used as a primer or topcoat. It is available in two forms, liquid and solid. You can purchase it from most home improvement stores.

How To Add A Layer Of Methacrylate To Your Solar Panels?

  • Apply a thin coat of methacrylate to cover the surface of your panel. The best way to do this is to use a sprayer. Spray a thin coat of methacrylate on your panel and let it dry for about 30 minutes.
  • Once the methacrylate has dried, apply another thin coat of methacrylate to the surface of your panel.
  • This approach is less expensive than using a solar panel cover, but it does require you to spray something onto your panels. Many people consider this to be more cost-effective since it doesn’t cost you anything extra, but it also requires you to do something.

Build a Wire Gauge to protect your Solar panels


If you are not interested in the above two methods you can build a wire gauge to protect your solar panels from hail.  You can use anything an old piece of wood, a piece of metal, or even a plastic soda bottle to build a wire gauge for your solar panel.

The most important thing to remember when building a wire gauge is that you need to be able to clamp the wire down securely. The wire gauge needs to be able to withstand the weight of the solar panels. Follow the steps below to build a wire gauge:

  • First, measure the length of the panels and cut two pieces of wire that were the same length.
  • Then use the hot glue gun to attach the wires to the panels. Make sure that the wires touch the panel.
  • Once the glue is dried add some more hot glue to secure the wires to the panel. At the end add a piece of plastic to protect the wire from the weather.

The best part about using a wire gauge is how easy it is to use and how inexpensive the materials are. Most people spend less than $20 to $30 in total for a set of materials.

Install An Automatic Solar Panel Angle System


An automatic solar panel angle system is a great way to protect your solar panels from hail. This type of system is designed to automatically adjust the angle of your panels based on the weather conditions.  They do this by using a series of gears, which allows the panels to move in a controlled fashion.

Most automatic solar panel angle systems have a sensor that detects the sun’s position. Once the sun reaches a certain point, the angle of the solar panels will automatically change. This installation can save you a lot of time and energy because you won’t have to manually adjust the angle of your solar panels. Solar panel angle systems are usually built into the frame of the solar panels. They are designed to work with the panels that come with the solar panel system.

You can find automatic solar panel angle systems at most home improvement stores or garden sections of your local hardware store. They are fairly inexpensive and will help you save a lot of time and energy. In addition, the best part about using an automatic solar panel angle system is that it will save you money in the long run.

Follow The Weather Alert Forecast



The best way to protect your solar panels from hail is to follow the weather forecast. If you see that there is a high chance of hailstorms coming your way, then you should move your solar panels to a safe location. It is always better to be safe than sorry.

Solar monitoring applications often have built-in weather forecasts, which can give you some predictions of the weather. These solar monitoring apps can tell you when the sun will come out and what the forecast will be for the next couple of days.

Regularly Examine your Solar Panels



If you want to be absolutely sure that your solar panels are protected from hail, then you should regularly examine them. Look for any cracks or dents in the panels. It is recommended that you do this every day, or at least once a week. This will ensure that your solar panels are in good shape. If you notice any damage to your solar panels, then you should get them repaired immediately. If you don’t repair them, then you could be facing a big problem.

Buy A Solar Power System That is Tested For Hail Damage 



The most common cause of hail damage is the wind, which can easily knock a panel off its mounting bracket. In fact, the wind is one of the most common causes of solar panel damage. If you are worried about the wind damaging your panels, it’s best to mount them on the ground or on a roof that is well-anchored.

If you live in an area with a lot of thunderstorms, you should be prepared for hail damage and buy a solar power system that is tested for hail.  There ought to be a “hail test” confirmation on the board or in their depiction on the web certified by the National Electrical Manufacturers Association (“NEMA”).

If you live in an area where storms are common, you should consider purchasing a system that is rated or certified to withstand hail damage. Some of the best solar power systems that are tested for hail damage are the ones that have been certified by NEMA. These solar power systems are usually made from heavy-duty materials.



The best way to protect your solar panels from hail is to be prepared. This means that you need to prepare your solar panels before the storm hits. You should also have a plan in place to move your solar panels to a safe location if the storm is severe. However, here are some more quick tips to help you avoid getting caught in a storm and damaging your panels:

  1. Make sure you have at least 5 feet of space between your house and any panels you mount to the roof. Strong winds can blow a hailstone through this gap and damage the panels.
  2. Make sure you have a weatherproof cover to shield the panels from rain and snow. You can use a rain cover or a metal roof overhang.
  3. Make sure you use heavy-duty, corrosion-resistant fasteners to hold your panels to the roof. Aluminum panels, for example, are less likely to be affected by hail than galvanized steel.
  4. Be aware that wind speeds during thunderstorms can reach well over 40 miles per hour, so be careful to position your panels so they won’t be struck by flying debris.
  5. Be sure to keep your panels clean to prevent the buildup of dirt and moisture that can reduce their efficiency.
  6. Don’t forget to store your panels during storms and don’t use them when it’s snowing or raining.
  7. Make sure you have the proper insurance to protect your panels from damage.
  8. Consider installing solar panels on a slope or ridge away from a building. This way you can take advantage of the strong, down-sloping winds.

In conclusion, there are many ways to protect your solar panels from hail. The most important thing to remember is that you should not be afraid to experiment. As long as you do not damage your panels, you should be fine. If you are looking for the cheapest way to protect your solar panels, then you can opt for the DIY method.



Is it necessary to invest in a professionally installed solar panel system?

No. It is not. However, if you want to be sure that your solar panels will withstand all types of weather conditions, then you should invest in a professionally installed system.

Do I have to buy a new solar panel system if it is damaged by the hail from the same company?

We would recommend that you look into getting a hail damage warranty on your panels. Some companies offer a warranty that covers damage caused by hail. This will protect you against unforeseen problems and will allow you to purchase a new system at a lower cost.

Which solar panels are durable for hail damage?

It depends on the type of solar panel. Galvanized steel panels are much more durable than aluminum.

 How to clean a solar panel?

You can clean your solar panels easily with a cloth or a biodegradable soap that’s made from natural oils. It is important to use the right materials for cleaning solar panels, as they can easily be damaged, and solar panels are costly to repair. You might be able to just run a hose over the panels to get rid of the dirt.

Similar Posts